您的位置: 标准下载 » 国内标准 » 行业标准 »

YS/T 509.6-2008 锂辉石、锂云母精矿化学分析方法 五氧化二磷量的测定 钼蓝分光光度法

时间:2024-05-05 17:11:26 来源: 标准资料网 作者:标准资料网 阅读:8407
下载地址: 点击此处下载
基本信息
标准名称:锂辉石、锂云母精矿化学分析方法 五氧化二磷量的测定 钼蓝分光光度法
英文名称:Methods for chemical analysis of spodumene and lepidolite concentrates-Determination of phosphorus pentoxide content-The molybdenum blue photometric method
中标分类: 冶金 >> 有色金属及其合金产品 >> 稀有轻金属及其合金
ICS分类: 冶金 >> 有色金属 >> 其他有色金属及其合金
替代情况:替代YS/T 509.7-2006
发布部门:国家发展和改革委员会
发布日期:2008-03-12
实施日期:2008-09-01
首发日期:
作废日期:
提出单位:全国有色金属标准化技术委员会
归口单位:全国有色金属标准化技术委员会
起草单位:新疆锂盐厂
起草人:季娟娟、夏淑芬、王克俊、刘佩君
出版社:中国标准出版社
出版日期:2008-09-01
页数:6页
适用范围

本部分规定了锂辉石、锂云母精矿中五氧化二磷含量的测定方法。
本部分适用于锂辉石、锂云母精矿中五氧化二磷含量的测定。测定范围:0.01%~1.00%。
本部分代替YS/T509.7-2006《锂辉石、锂云母精矿化学分析方法 钼蓝光度法测定五氧化二磷量》(原GB/T3885.7-1983)。
本部分与YS/T509.7-2006相比主要有如下变动:
---将3.7中置于烧杯中改为置于250mL 烧杯中;
---对文本格式进行了重新编辑;
---补充了质量保证和控制条款,增加了重复性条款。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 有色金属及其合金产品 稀有轻金属及其合金 冶金 有色金属 其他有色金属及其合金
【英文标准名称】:Videomagnetictape50mm;spools
【原文标准名称】:录象磁带50mm.卷轴
【标准号】:DIN15900Bb.3-1962
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:
【国际标准分类号】:
【页数】:
【正文语种】:


Product Code:SAE J1937
Title:Engine Testing With Low-Temperature Charge Air-Cooler Systems in a Dynamometer Test Cell (STABILIZED Sep 2011)
Issuing Committee:Sae Ic Powertrain Steering Committee
Scope: The methods presented in this SAE Recommended Practice apply to the controlled testing of low-temperature charge, air-cooled, heavy-duty diesel engines. This document encompasses the following main sections: a.) Definitions of pertinent parameters; b.) Vehicle testing to determine typical values for these parameters; c.) Description of the setup and operation of the test cell system; d.) Validation testing of the test cell system. While not covered in this document, computer modeling of the vehicle engine cooler system is recognized as a valid tool to determine cooler system performance and could be utilized to supplement the testing described. However, adequate in-vehicle testing should be performed to validate the model before it is used for the purposes outlined. The procedure makes references to test cycles that are prescribed by the United States Environmental Protection Agency (US EPA) and are contained in the Code of Federal Regulations. The existence of other international test cycles, which can be used for validation testing, is acknowledged.